M50 E36 M3 manifold conversion kit w/or w/out manifold

SoCal M3 · Fri, May-12-2006, 05:30:23 PM

I built this kit for my car but had to convert back to S52 manifold.

The manifold support brackets bolt back up (after slight modification) AND no more zip-ties to hold up the crank vent and ICV and dipstick together. It all bolts back up properly as BMW engineers intended.

Everything is pre-cut and pre-assembled and ready to connect to the accessories and manifold!!

Brackets and hardware included:

Bracket and hardware for crank vent and ICV accessories.
2 fuel rail adaptor brackets and hardware so you can bolt up the OBDII fuel rail.
All the proper fuel/emissions hose and fittings and clamps pre-cut and pre-assembled to adapt the OBDI manifold.
All of the 3.5mm vacuum line needed to adapt the secondary air pump solenoid and the charcoal canister solenoid to the OBDI manifold.
6 manifold gaskets, throttle body gasket cut in half (to adapt your OBDII TB), and manifold hose connector ALL INCLUDED (some not pictured)
Complete DIY install manual with color photos and diagrams.

I have a manifold I will sell with this kit as well.

$190 + shipping for just the kit
$365 + shipping for the kit plus manifold

T2 · Sat, May-13-2006, 02:12:06 AM

Good price but you are going to have problems selling with just one post...do you have an ebay account to verify your integrity?

SoCal M3 · Sat, May-13-2006, 05:31:36 AM

Quote:

Originally Posted by T2

Good price but you are going to have problems selling with just one post...do you have an ebay account to verify your integrity?

yes and I am a verified premium paypal user too. PM me for further details.

or email to evi1234@earthlink.net for more pics and info. are you socal local?? I'll be at rock store in the morning for breakfast around 9am...silver E36 sedan.

SoCal M3 · Sun, May-14-2006, 03:22:41 AM

wish to go ttt

SoCal M3 · Mon, May-15-2006, 12:33:35 AM

Bump for new pic!!

SoCal M3 · Mon, May-15-2006, 03:56:29 AM

I will post this on ebay if it would make people feel better about the deal.

check this out...it's not getting much traffic either:

http://www.roadfly.com/bmw/classifieds/general/detview.php?view=52816

I have a right up on it here:

http://mydrive.roadfly.com/blog/epeviston/

SoCal M3 · Wed, May-17-2006, 01:39:50 PM

bumpedy

wanganracer · Fri, Aug-25-2006, 03:46:29 AM

pm sent...if your still around?

Fri, May-12-2006, 05:30:23 PM	#1
SoCal M3 Registered User Join Date: May 2006 Posts: 7 Reputation: 0	M50 E36 M3 manifold conversion kit w/or w/out manifold I built this kit for my car but had to convert back to S52 manifold. The manifold support brackets bolt back up (after slight modification) AND no more zip-ties to hold up the crank vent and ICV and dipstick together. It all bolts back up properly as BMW engineers intended. Everything is pre-cut and pre-assembled and ready to connect to the accessories and manifold!! Brackets and hardware included: Bracket and hardware for crank vent and ICV accessories. 2 fuel rail adaptor brackets and hardware so you can bolt up the OBDII fuel rail. All the proper fuel/emissions hose and fittings and clamps pre-cut and pre-assembled to adapt the OBDI manifold. All of the 3.5mm vacuum line needed to adapt the secondary air pump solenoid and the charcoal canister solenoid to the OBDI manifold. 6 manifold gaskets, throttle body gasket cut in half (to adapt your OBDII TB), and manifold hose connector ALL INCLUDED (some not pictured) Complete DIY install manual with color photos and diagrams. I have a manifold I will sell with this kit as well. $190 + shipping for just the kit $365 + shipping for the kit plus manifold

Sat, May-13-2006, 02:12:06 AM	#2
T2 The Anti-Poser Join Date: Apr 2003 Age: 48 Posts: 2,799 Reputation: 0 Location: Ft. Worth	Good price but you are going to have problems selling with just one post...do you have an ebay account to verify your integrity? __________________ T2 - www.thedriversedge.net "I'm just a caveman. I fell on some ice and later got thawed out by some of your scientists. Your world frightens and confuses me! Sometimes the honking horns of your traffic make me want to get out of my BMW and run off into the hills, or wherever. Sometimes when I get a message on my fax machine, I wonder: "Did little demons get inside and type it?" I don't know! My primitive mind can't grasp these concepts."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: KO Performance M50 Intake Manifold Conversion Kit - 2.8L and 3.2L	liquid89	E36 / E30 - Parts for Sale/Wanted	0	Wed, Dec-12-2007 01:22:47 AM
Uh Oh! M50 Manifold Conversion...	thedood	E36 M3 (1992-1999)	3	Sun, Dec-10-2006 01:38:51 AM
The under $200 M50 manifold conversion	epj3	E36 M3 (1992-1999)	15	Sat, Sep-30-2006 05:42:20 AM
M50 Manifold Conversion '97?	Diesel///M3	E36 M3 (1992-1999)	9	Tue, Jan-03-2006 07:01:42 PM
KO M50 Intake Manifold Conversion Kit	bigneil	E36 M3 (1992-1999)	7	Sun, Oct-16-2005 03:21:49 PM

Sun, May-14-2006, 03:22:41 AM	#4
SoCal M3 Registered User Join Date: May 2006 Posts: 7 Reputation: 0	wish to go ttt

Mon, May-15-2006, 12:33:35 AM	#5
SoCal M3 Registered User Join Date: May 2006 Posts: 7 Reputation: 0	Bump for new pic!!

Mon, May-15-2006, 03:56:29 AM	#6
SoCal M3 Registered User Join Date: May 2006 Posts: 7 Reputation: 0	I will post this on ebay if it would make people feel better about the deal. check this out...it's not getting much traffic either: http://www.roadfly.com/bmw/classifieds/general/detview.php?view=52816 I have a right up on it here: http://mydrive.roadfly.com/blog/epeviston/

Wed, May-17-2006, 01:39:50 PM	#7
SoCal M3 Registered User Join Date: May 2006 Posts: 7 Reputation: 0	bumpedy

Fri, Aug-25-2006, 03:46:29 AM	#8
wanganracer chained to the werkstatt Join Date: Jul 2005 Posts: 77 In the garage: '96 BMW M3 Reputation: 0 Location: Columbus, Oh	pm sent...if your still around?