FS: 19" BBS RGR with tires. Lots of pics and must see!

swc · Thu, May-27-2010, 03:40:46 AM

SOLD
I posted these as a feeler last week but decided to go different route. So they are officially for sale now.

Spec:
Diamond Black
19x8.5 et.32 weight 20.3lbs These are lightest BBS wheels!
19x10 et.20 (yes, rears are same as CHs which is aggressive look!) weight 22.0lbs
Tires are General UHPs(245/35 and 275/30). They have about 3000~3500 miles. 80% front and 70% rear tread left(see pics below).

Condition of wheels:
Two fronts are perfect or near perfect. No bend, cracks, curb rash or scratches. One rear has 2 minor curb rashes(see the pic) and the other rear has a small rock chips(see the pic). Overall rating is 9.5 out of 10 for fronts and 8.5 out of 10 for rears.

Price:
Priced to sell quick at $2300 local pick up(prefered) or $2500 shipped. For those who have BBK, I'll throw in RE 10mm spacers with extended bolts for $70 extra. This is a very good deal for one of the best wheels in decent condition. Tirerack sells them for $4450 a set without tires and before shipping!
http://www.tirerack.com/cart/Holding...hopTires=false
So basically you are getting them at half price plus tires!!!

Driver's front

Passenger's front

Driver's rear

Passenger's rear

One curb rash(not too bad unless looking closely)

Rock chips

Showing "20" offset on rear and "M" valve cover

Front tire tread

Rear tire tread

On the car

mbox · Thu, May-27-2010, 04:04:55 AM

tempting....gd lck with the sale!

mickaphely · Thu, May-27-2010, 04:52:32 AM

sick wheels man....

swc · Thu, May-27-2010, 01:32:22 PM

Thanks guys and bump ttt.

m32006 · Fri, May-28-2010, 03:06:42 AM

good luck with sale Choi

m32006 · Fri, May-28-2010, 03:11:04 AM

good luck with sale man

swc · Fri, May-28-2010, 04:14:10 AM

Quote:

Originally Posted by m32006

good luck with sale man

Thanks Jack and sale is pending!

fitchesbass · Fri, May-28-2010, 06:24:34 AM

Nice man - Didn't know you were on M3forum...

Looking forward to mounting them on the Z4M - interested to see how they turn out with a somewhat darker color like silver grey.

I can't wait to ditch the stock wheels on here finally!

mickaphely · Fri, May-28-2010, 06:42:24 AM

Quote:

Originally Posted by fitchesbass

Nice man - Didn't know you were on M3forum...

Looking forward to mounting them on the Z4M - interested to see how they turn out with a somewhat darker color like silver grey.

I can't wait to ditch the stock wheels on here finally!

Everyone is entitled to his opinion, and i gotta tell you that those stock wheels that you have in the picture actually look pretty good. of course, the BBS would probably look much better, but i just wanted to point out that the stockers are pretty cool looking too.

fitchesbass · Fri, May-28-2010, 06:45:44 AM

In that picture they look alright. They're not a bad design (the spokes look pretty good in motion blah blah LOL), but the BMW wheel finish quality is pretty bad on them. Even just using soap and water to wash them... the finish is coming off in the corners of the spokes and so forth. Kind of a let down for an oem BMW wheel. My old M contours on my E36 had like 200k miles on them and looked new... go figure.

I might powdercoat the stockers black for an alternate look.

Thu, May-27-2010, 03:40:46 AM	#1
swc Registered User Join Date: Aug 2006 Posts: 1,524 Reputation: 0 Location: Lansdale PA	19" BBS RGR with tires. Lots of pics and must see! SOLD I posted these as a feeler last week but decided to go different route. So they are officially for sale now. Spec: Diamond Black 19x8.5 et.32 weight 20.3lbs These are lightest BBS wheels! 19x10 et.20 (yes, rears are same as CHs which is aggressive look!) weight 22.0lbs Tires are General UHPs(245/35 and 275/30). They have about 3000~3500 miles. 80% front and 70% rear tread left(see pics below). Condition of wheels: Two fronts are perfect or near perfect. No bend, cracks, curb rash or scratches. One rear has 2 minor curb rashes(see the pic) and the other rear has a small rock chips(see the pic). Overall rating is 9.5 out of 10 for fronts and 8.5 out of 10 for rears. Price: Priced to sell quick at $2300 local pick up(prefered) or $2500 shipped. For those who have BBK, I'll throw in RE 10mm spacers with extended bolts for $70 extra. This is a very good deal for one of the best wheels in decent condition. Tirerack sells them for $4450 a set without tires and before shipping! http://www.tirerack.com/cart/Holding...hopTires=false So basically you are getting them at half price plus tires!!! Driver's front Passenger's front Driver's rear Passenger's rear One curb rash(not too bad unless looking closely) Rock chips Showing "20" offset on rear and "M" valve cover Front tire tread Rear tire tread On the car __________________ 02 M3 vert AA SC...(Gone) 06 C6 Z06...(Gone) 02 M5...(Current) 07 997 turbo mods begins Last edited by swc; Sat, May-29-2010 at 12:22:22 PM.

Thu, May-27-2010, 04:04:55 AM	#2
mbox vanos inside! Join Date: Sep 2006 Posts: 1,189 Reputation: 0 Location: from the center of the earth.....SoCal baby!	tempting....gd lck with the sale! __________________ HRE \| UUC \| KW \| AC Schnitzer \| Supersprint \| Dinan \| V1

Thu, May-27-2010, 04:52:32 AM	#3
mickaphely Registered User Join Date: May 2008 Posts: 1,393 In the garage: '00 NISSAN SENTRA '02 BMW M3 Reputation: 0 Location: Seattle	sick wheels man.... __________________

Thu, May-27-2010, 01:32:22 PM	#4
swc Registered User Join Date: Aug 2006 Posts: 1,524 Reputation: 0 Location: Lansdale PA	Thanks guys and bump ttt. __________________ 02 M3 vert AA SC...(Gone) 06 C6 Z06...(Gone) 02 M5...(Current) 07 997 turbo mods begins

Fri, May-28-2010, 06:24:34 AM	#8
fitchesbass Like a carpenter that makes stairs Join Date: Jul 2003 Age: 27 Posts: 15,842 Reputation: 0 Location: NoVA	Nice man - Didn't know you were on M3forum... Looking forward to mounting them on the Z4M - interested to see how they turn out with a somewhat darker color like silver grey. I can't wait to ditch the stock wheels on here finally! __________________ Last edited by fitchesbass; Fri, May-28-2010 at 06:35:12 AM.

Fri, May-28-2010, 03:06:42 AM	#5
m32006 Registered User Join Date: Feb 2008 Posts: 550 Reputation: 0	good luck with sale Choi

Fri, May-28-2010, 03:11:04 AM	#6
m32006 Registered User Join Date: Feb 2008 Posts: 550 Reputation: 0	good luck with sale man

Fri, May-28-2010, 06:45:44 AM	#10
fitchesbass Like a carpenter that makes stairs Join Date: Jul 2003 Age: 27 Posts: 15,842 Reputation: 0 Location: NoVA	In that picture they look alright. They're not a bad design (the spokes look pretty good in motion blah blah LOL), but the BMW wheel finish quality is pretty bad on them. Even just using soap and water to wash them... the finish is coming off in the corners of the spokes and so forth. Kind of a let down for an oem BMW wheel. My old M contours on my E36 had like 200k miles on them and looked new... go figure. I might powdercoat the stockers black for an alternate look. __________________ Last edited by fitchesbass; Fri, May-28-2010 at 06:53:47 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode