[eshaun]

Up for sale is a drivers (left) side OEM CSL Seat Mechanism (Part# 52107895957) including misc tilt hardware from both seats available (refer to #'s 1, 4,9, 10 and misc bolts in the photo from REALOEM below). As both my seats sold last week, this needs to go as well.

Perfect opportunity for someone looking for spare OEM CSL bits or if you already have sourced seats elsewhere. Also if you're a savvy CSL guru you'll notice the top of the brack has been shaved down to allow the bucket to sit a few mm lower to gain headroom, however all mechanisms and tilting of the seat when mounted function 100% as intended.

$600 firm for everything noted in the description and photos below (MSRP is ~1500ea just for the bracket from BMW).

http://realoem.com/bmw/showparts.do?...27&hg=52&fg=10

Prefer to sell locally, but if you are willing to pay for shipping then I can find out what it would cost.

If you are serious or have any questions feel free to call or email me.
415.683.0235

[eshaun]

bump for oem csl, open to reasonable offers to get this out of my garage

[eshaun]

Did some garage cleaning over the weekend and took a few more photos. Make me an offer...

[daytonaviolet]

do you have a closeup picture of the where part #4 attaches to the side of the csl seat?

[eshaun]

Originally Posted by daytonaviolet

do you have a closeup picture of the where part #4 attaches to the side of the csl seat?

Sure, have a ton of pics...this angle work? Here's the higher res...

Btw those ziploc bags contain just about a complete set of seat related hardware for both seats, need some spares

[daytonaviolet]

thanks..

after removing the components off the side of the csl seat, what was left on the side??

[eshaun]

Originally Posted by daytonaviolet

thanks..
after removing the components off the side of the csl seat, what was left on the side??

Not much, just two brackets which are intended to be permanently mounted to the seat. At the time I was testing out the Recaro brackets I elected to leave them there so as to not wreck the seat shell.

Here's the only good comparison shot I have online at the moment...

[daytonaviolet]

thanks for all the pics eshaun so if someone wanted to put this seat bracket on RPP, they would have to fabricate something similar to the sides of the CSL seats.... well thats if they wanted it to tilt forward (to allow passengers in the back).

ps.... there looks like 3 components on the side of the csl seat. two of which are riveted on. did you take those off as well??

[eshaun]

Originally Posted by daytonaviolet

thanks for all the pics eshaun so if someone wanted to put this seat bracket on RPP, they would have to fabricate something similar to the sides of the CSL seats.... well thats if they wanted it to tilt forward (to allow passengers in the back).

ps.... there looks like 3 components on the side of the csl seat. two of which are riveted on. did you take those off as well??

They would only need to fab something if they wanted to retain the tilting mech, yep. Otherwise as long as the holes line up I dont see why a RPP wouldnt fit on this bracket. Know anyone who wants to try

I didnt remove any of the riveted pieces off the seat shell, the third attachment point is more like a nub which was either part of the shell or glued on, I dont recall. At the time I was testing out the Recaro brackets I decided to leave them on as to avoid wrecking the seat shell.

[daytonaviolet]

actually i had someone contact me regarding CSL brackets with RPP. we discussed the limitations of the tilt function as 3 components would be needed which is not sold separately.