FS: Ceramic coated headers

BDUB328I · Tue, Oct-04-2011, 02:45:34 AM

Quote:

Originally Posted by ///M3AN ONE

I have a stainless set ready to ship if you guys are interested. This set has been modified and will bolt up. You won't throw codes unless you're catless and not running software or defoulers. Pm me if interested.

Also, if you're not in a rush, I'm currently road testing my "Version 2" set on my car right now. It's the same design as my first ones but with the 02 bungs in the correct spots, thinner flanges so you can use your OEM E46 studs, and same measurements on the runners and collectors. This set bolted right up but very slightly touched the fcab. I had to make a groove on it but has been running good on my boosted M3. I am doing some dyno testing real soon to tweak my current tune. I plan to take them off and send back to my distributer to make the adjustment near the fcab. Not sure how long it will take to get the adjustments done, but I've used all the feedback on my first sets to make my "Version 2"

sounds great! im not in a rush at all (im puting a m3 motor into my e46 sedan) im pulling the motor tom. but i can always do other things until i have everything with my motor ready. keep me updated!

///M3Fresh · Tue, Oct-04-2011, 03:08:10 AM

Quote:

Originally Posted by ///M3AN ONE

I have a stainless set ready to ship if you guys are interested. This set has been modified and will bolt up. You won't throw codes unless you're catless and not running software or defoulers. Pm me if interested.

Also, if you're not in a rush, I'm currently road testing my "Version 2" set on my car right now. It's the same design as my first ones but with the 02 bungs in the correct spots, thinner flanges so you can use your OEM E46 studs, and same measurements on the runners and collectors. This set bolted right up but very slightly touched the fcab. I had to make a groove on it but has been running good on my boosted M3. I am doing some dyno testing real soon to tweak my current tune. I plan to take them off and send back to my distributer to make the adjustment near the fcab. Not sure how long it will take to get the adjustments done, but I've used all the feedback on my first sets to make my "Version 2"

Will there be a price discrepancy between these and "version 2"? Also what are the chances of a group buy for them and when do you plan to have out for sale/shipped. I can wait, car is in storage, but would to get an idea of a timeline so I can stay tuned to this thread or any others you my make about the new Headers.

quiksilver m3 · Tue, Oct-04-2011, 08:16:22 PM

I would be interested in seeing the price and the dyno's too.

WRX2BIMA · Wed, Oct-05-2011, 11:28:39 AM

sent a PM, very interested, as i am planning for a full exhaust in the spring

kokgo20 · Wed, Oct-05-2011, 04:47:12 PM

If i run those instead of the OEM header, will check engine light come on cuz of no cats?

Laguna01///M3 · Tue, Oct-11-2011, 12:56:10 AM

Im in for your V2 set.

Mseries415 · Thu, Oct-13-2011, 04:07:20 PM

Im interested ! Do you still have any available ? And what city or state are you in ?

xxweisxxm5 · Sun, Oct-23-2011, 03:49:51 PM

got my headers installed also did my inspection 2, coilovers, and Bbk. I highly recommend locals going to his place to get service an mods installed very honest and sincere member who needs the dealer. Thanks again.

asn007 · Mon, Oct-24-2011, 06:23:51 AM

Just got my headers installed by Chris this weekend. Paired with my Gruppe M rep exhaust, it's loud enough to wake the dead! (OEM exhaust will cut down noise) I got to drive around with it all weekend after the install and it simply unleashed the beast in the M3! Your neighbors will hate you, people will stare, but I think it increased safety since they'll hear you a mile away

Most importantly, it put a big grin on my face doing all that!

Overall, I love the mod, you WILL feel the extra pull from the headers, and Chris is a great guy to deal with. Will be using your services again, thanks Chris!

S54B32YYC · Mon, Jan-23-2012, 05:25:42 AM

Any word on the V2's? Would like a good fitting set of these before spring.. Any dynos yet?

Tue, Oct-04-2011, 08:16:22 PM	#23
quiksilver m3 "Float like a Cadillac, sting like a B'MER" Join Date: Aug 2006 Posts: 1,754 Reputation: 0	Re: Ceramic coated headers I would be interested in seeing the price and the dyno's too. __________________ DECEASED : 2005 M3 - TiAg, 6 Spd, All Factory Opts. SSR GT3 wheels w/ Bridgestone RE050A 235/40-18 in front, 285/30-19 in rear. Magnaflow exhaust. SS V2 headers, Polished 4.10 diff, Baleen intake, D/A Race software, Bilstein PSS9s, V-CSL CF Trunk, Euro tray, ZHP Short Shifter, Clif Design 10" Subs in Dual BSW deck mount enclosure w/ Clif Design 1000W amp. NEW AND IMPROVED : 2004 M3 - Ag Gray, SMG. All Factory Opts. Custom Wide Body. VFE Stage 1 SC. Magnaflow Exhaust. Bilstein PSS9 C/O's. V-CSL All CF trunk, front & rear diffuser, center console, engine cover & GT hood. Iforged Essen 19x8 (Falken FK-452 235/35) in front & 19x12 (Nitto NT05 335/30) in rear. Sparco seats. Pioneer AVIC Z1 head unit w/ full custom stereo. Rotora 6 puck front & 4 puck rear brakes w/ cross drilled rotors. Strass CF rear window wing. CF gills and grills. AC Schnitzer hand brake & front strut tower brace. And more.......

Wed, Oct-05-2011, 11:28:39 AM	#24
WRX2BIMA Lurker Join Date: Jun 2010 Posts: 1,407 In the garage: '05 LAND ROVER RANGE ROVER '04 BMW M3 '02 BMW 330 Reputation: 0 Location: Windsor, CT	Re: Ceramic coated headers sent a PM, very interested, as i am planning for a full exhaust in the spring __________________ 2004 A/W 6MT Carbon Junkie 44k on the clock Cosmetic:19x9/19x10 HRE 840R Wheels, Michelin Pilot Sport 2's, V-GTR Hood with carbon upper hood vent, CF CSL trunk, CF rear diffuser, CF window piller ad on's, Custom CF headlight inserts, Phospyhere Angel Eyes, Custom CF interior trim, CF roundels, CF front grill, CF side grills, AC Schnitzer e-brake handle and pedals, Status Gruppe 1 Piece Lip, painted reflectors, 35% Tint Suspension/Brakes:Brembo GT 380mm Front Big Brake Kit with 8-Piston Calipers, 345mm Rear Big Brake Kit, KW Variant 2 Coilovers, Eibach front and rear sway bars Performance:Carbonio carbon fiber intake, Status Gruppe Ceramic Coated Headers, Custom Performance Euro200R Section 1, RE X-Pipe with EVC Kit, Supersprint Race Exhaust, , Rogue Engineering's Octane short shifter Audio: HK Premium Sound, Dynavin V5 Head Unit, JL Audio 10 W7 in a JL custom box, Alpine MD-X6 Amp My Car is For Sale: http://www.m3forum.net/m3forum/showthread.php?t=431434

Wed, Oct-05-2011, 04:47:12 PM	#25
kokgo20 Registered User Join Date: Jan 2011 Age: 30 Posts: 1,626 In the garage: '09 MERCEDES-BENZ CLS550 '03 BMW M3 '06 BMW 325 Reputation: 0 Location: Memphis	Re: Ceramic coated headers If i run those instead of the OEM header, will check engine light come on cuz of no cats? __________________ 06/2003 Tiag SMG/IR - 600 TCKline - Euro Headers & Cats - Stoptech BBK 6 pod front & 4 pod rear with steel lines - 75mm Studs conversion - PF RTABs & FCABs - Multi color AEs - Iconz one piece bumper Lip - Roof & interior trim CF wrap - Smoked Side markers - painted bumper reflectors - V1 with hard wire&Stealth one - M Track Mod - ZCP steering rack - BMW MS 4.10 - Dual LI - CSL SMG flash - Euro DME flash - CSL Style diffuser - Dinan Intake - Borla Exhaust - E9x Door handle LEd retrofit - Seibon CSL bootlid on the way

Tue, Oct-11-2011, 12:56:10 AM	#26
Laguna01///M3 PapaSmurf Join Date: Jan 2003 Posts: 415 Reputation: 0 Location: Livingston, NJ	Re: Ceramic coated headers Im in for your V2 set. __________________

Thu, Oct-13-2011, 04:07:20 PM	#27
Mseries415 Registered User Join Date: Oct 2011 Age: 29 Posts: 53 In the garage: '05 BMW M3 Reputation: 0 Location: Bay Area	Re: Ceramic coated headers Im interested ! Do you still have any available ? And what city or state are you in ?

Sun, Oct-23-2011, 03:49:51 PM	#28
xxweisxxm5 Registered User Join Date: Dec 2004 Posts: 554 Reputation: 0 Location: San Ramon	Re: Ceramic coated headers got my headers installed also did my inspection 2, coilovers, and Bbk. I highly recommend locals going to his place to get service an mods installed very honest and sincere member who needs the dealer. Thanks again. __________________ Last edited by xxweisxxm5; Sun, Oct-23-2011 at 03:56:32 PM.

Mon, Oct-24-2011, 06:23:51 AM	#29
asn007 Registered User Join Date: Dec 2005 Posts: 204 Reputation: 0 Location: Millbrae	Re: Ceramic coated headers Just got my headers installed by Chris this weekend. Paired with my Gruppe M rep exhaust, it's loud enough to wake the dead! (OEM exhaust will cut down noise) I got to drive around with it all weekend after the install and it simply unleashed the beast in the M3! Your neighbors will hate you, people will stare, but I think it increased safety since they'll hear you a mile away Most importantly, it put a big grin on my face doing all that! Overall, I love the mod, you WILL feel the extra pull from the headers, and Chris is a great guy to deal with. Will be using your services again, thanks Chris!

Mon, Jan-23-2012, 05:25:42 AM	#30
S54B32YYC Registered User Join Date: Aug 2011 Posts: 41 Reputation: 0	Re: Ceramic coated headers Any word on the V2's? Would like a good fitting set of these before spring.. Any dynos yet?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode